¡Suscríbete a nuestro blog!

Floor cleaning: Tips and tricks for a spotless home

In ParaTuReforma we have prepared a small guide with useful tips and tricks for the floor cleaning at home. The reason is that the pavement is a very sensitive material and, consequently, you should not neglect its maintenance to keep it impeccable for longer. Read on to take note of the secrets that we provide in this content!

Tips and tricks

As we said, to clean the floor it is essential to pay attention to the type of material it is made of. Keep in mind that the components of each one have different properties and characteristics, so it is not possible to use the same treatment for all of them.

CTA 3 - Consejos y errores comunes

Ceramic or porcelain tiles

For the flooring the first thing to do is to sweep or vacuum in order to get rid of any dust or dirt. We recommend that you purchase a vacuum cleaner for its many advantages and ease of use.

To wash porcelain or ceramic tiles, a mixture of warm water and a little detergent is sufficient, although it must be very mild. Under no circumstances should chemical or abrasive products be used, as they will certainly damage the finish. Mix the solution with clean water and use a mop. You can also use a soft cloth, remember that at the end of the cleaning process there should not be any water stains.

ceramic floor cleaning

The joints of these tiles require require more maintenance due to the fact that it is manual. Prepare a mixture of baking soda with water and apply it with an old toothbrush. This way, mildew and accumulated dirt will no longer be a problem.

We recommend that you make sure that the ceramic or porcelain tile is always dry, as this is the correct way to prevent the formation of bacteria and fungus.

Wood

The key to keeping your wood floor in top condition is to sweep or vacuum it regularly. The most immediate consequence is that dirt will not scratch the surface.

This material cannot be cleaned with just any product. We suggest you take a look at the products we have in our catalog to protect floors and coverings such as, for example, the spray to clean the joints. However, do not hesitate to contact us so that we can help you find the product you need. There is a solution that never fails, the mixture of white vinegar and water. However, the amount of water must be proportional, since the wood runs the risk of warping.

Vinyl

For a vinyl floor it is also highly recommended that cleaning is carried out with some continuity. This is the best way to prevent dust and dirt from accumulating.

Specific products for cleaning this material are available on the market, although you can also prepare a combination of water with a little neutral soap to scrub the floor. The next step is to rinse the floor with clean water to remove any dried soap residue.

Wet spots? We also have the solution. Just apply a little baking soda using a damp sponge.

Although it may seem obvious, it is important to remember that furniture must be protected to prevent damage.

Polished concrete

The first thing to note is that you should never use chemical or abrasive products, as they will ruin the floor.

The means of cleaning are very similar to those of other materials. First of all, a solution of warm water with a neutral detergent for scrubbing, although you should previously sweep or vacuum the dust and coarser dirt on the surface.

Likewise, we advise you to seal the polished concrete floor every two years to maintain its original appearance. It will allow you to protect it from hard-to-clean stains and all kinds of damage. Another simple trick is to place carpets in the areas of high traffic in order to reduce wear and tear.

Marble

This material is undoubtedly one of the most delicate in terms of maintenance. The main reason is its porous nature. As a result, it tends to get dirty very often and loses its shine over time. This characteristic means that chemicals and abrasives cannot be used. Therefore, bleach is strongly discouraged.

On the other hand, it prevents moisture from penetrating the marble, as it is very harmful. Before scrubbing, mop or wipe the marble floor with a mop or cloth to remove any moisture that may be present, which will also add shine to the marble floor.

floor cleaning

We advise you to apply a coat of wax once a month on the surface. In this way, the shine will remain intact and, in addition, you will inhibit the circumstance of stains being absorbed.

Parquet

Parquet is another of the delicate materials in terms of conservation, as well as somewhat more expensive than other types of flooring.

To keep it spotless, the first tip is to sweep regularly. If you use a vacuum cleaner, it should have a soft brush or a microfiber mop to pick up dust. Otherwise, the chances of scratching the floor are very high.

As for the products, prepare warm water with a specific detergent for this material. Dip a cloth in the solution and squeeze out the excess water. It is very harmful to this type of flooring because of its easy penetration into the joints. To properly clean the parquet floor, you must do it in the direction of the wood line.

And finally, let it dry completely before your family passes by. Moreover, we advise you to open the windows or even place a fan for faster and easier drying.

Did you find the tips for clean floors we have provided here interesting?

As you have seen, the cleaning of floors is an essential step to keep them in the best possible conditions. Remember that we are at your disposal by any of the contact methods you will find on the web. Trust in ParaTuReforma and get materials and tools, current and quality, to beautify and care for your home.

CTA 3 - Consejos y errores comunes

Leave a Comment